Raider RD-CDL29 Manuel D'instructions page 13

Worn (shorter than 5 mm), burned or broken carbon brushes on the motor should be replaced. Always replace both brushes
at the same time. Carry out the work on changing carbon brushes only to a qualified person, with original spare parts in authorized
RAIDER workshops.
6.2. All types of malfunctions must be removed in authorized RAIDER service stations.
6.3. Repairs to your power tools should only be performed by qualified specialists. This ensures the safe operation of power
tools.
7. Environmental protection.
7.1. In order to protect the environment, the power tool and packaging must be suitably processed for re-use of the raw
materials contained therein.
Do not dispose of power tools in household waste! According to the European Union Directive 2012/19 / EC on end-of-
life electrical and electronic devices and the validation and as a national law, power tools that can no longer be used must
be separately collected and subjected to appropriate processing for the recovery of the contents making them valuable raw
materials.
7.2. Rechargeable battery.
Lithium-ion battery (Li-ion).
Do not dispose of batteries in household waste or in water tanks! Do not burn them!
Batteries should be collected, recycled or disposed of in an environmentally friendly way.
According to Directive 2006/66/EC, spent rechargeable or standard batteries must be recycled.
Elements displayed:
1. Speed selector
2. High-speed chuck
3. Torque regulator
4. Rotation direction switch
5. Start-up switch
6. Rechargeable battery
7. Battery release button
8. Charger
9. Additional battery
10. Battery status indicators
13