Télécharger Imprimer la page

Publicité

Liens rapides

Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and hardware before assembly. Parts
apparently missing are often found in the packing materials. If you do not have all the parts listed, have your dealer contact us and they will be sent to you immediately.
Merci d'avoir acheté ce produit. Veuillez lire et suivre les instructions ci-dessous. Vérifiez avant le montage que vous avez toutes les pièces et fixations. Les pièces qui
semblent manquer se trouvent souvent dans les matériaux d'emballage. Si vous n'avez pas toutes les pièces de la liste, demandez à votre détaillant et nous vous lé
enverrons immédiatement.
Remark : there is a tip restraint kit provided
on the back of this product. Please read the
instructions thoroughly and install immediately
when placed in home.
5
MADE IN VIETNAM
FABRIQUEÙ EN VIETNAM
PAGE 1 OF 1
It is recommended to install protective pads under all legs and supports to avoid damage or
scratches when placing furniture on a wood floor or other hard surface, and to limit
indentation and prevent discoloration if placing on carpet.
II est
des meubles pour
surfaces dures, et pour limiter I'empreinte et
reposent sur la moquette
STEP 1/ ETAPE 1
Remove all screws before
readjust the shelf height.
Assembly completed
PART LIST/ LISTE DE PIECES
A
REAR FOOT / PIED
B
FRONT FOOT BL & BR / PIED
C
ASSEMBLY INSTRUCTION
INSTRUCTION DE MONTAGE
ITEM NO : 1958-55 BUFFET / BUFFET
de placer des coussins protecteurs sous tous les pieds et toutes les bases
d'endommager ou
B(L)
STEP 3/ ETAPE 3
2 pcs
2 pcs
SUPPORT LEG/ SUPPORT POUR
1 pc
TRANSVERSES
les planchers en bois ou autres
la
C
Leveler
STEP 2/ ETAPE 2
B(R)
Leveler
HARDWARE LIST/ LISTE DE QUINCAILLERIE
1
ALLEN KEY/ CLE ALLEN
2
BOLT/ BOULON
3
SPRING WASHER/ RONDELLE D'ARRET
4
FLAT WASHER/ RONDELLE PLATE
5
ANTI-TIPPING KIT
* HARDWARE SET ARE IN 1958-55 FOR ASSEMBLY
quand les meubles
B(R)
A
A
4
3
2
1
4
3
2
1
L80*30*4MM
1 pc
4 pcs
Ø5/16*3"
4 pcs
Ø5/16*13*1.2
Ø5/16*19*1.8
4 pcs
1 set

Publicité

loading

Sommaire des Matières pour Homelegance 1958-55

  • Page 1 4 pcs FLAT WASHER/ RONDELLE PLATE 2 pcs FRONT FOOT BL & BR / PIED FABRIQUEÙ EN VIETNAM 1 set ANTI-TIPPING KIT SUPPORT LEG/ SUPPORT POUR 1 pc * HARDWARE SET ARE IN 1958-55 FOR ASSEMBLY TRANSVERSES PAGE 1 OF 1...
  • Page 2 ASSEMBLY INSTRUCTION INSTRUCTION DE MONTAGE ITEM NO : 1958-50 HUTCH / HUCHE Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and hardware before assembly. Parts apparently missing are often found in the packing materials. If you do not have all the parts listed, have your dealer contact us and they will be sent to you immediately. Merci d'avoir acheté...