AmazonBasics B01GG76234 Mode D'emploi page 7

Operation


Control Switch

Using the switch located on the unit, select one of the following settings by sliding the switch
either left or right. (FIGURE 2)
FIGURE 2

I
AUTO / ON:
This setting allows the shredder to be automatically started by
inserting paper into the feed slot. Always feed the paper in as
straight as possible. When the paper has passed through, the
shredder will automatically stop.
O
OFF:
This setting turns off all features of the shredder. For safety
reasons, we recommend that you leave the shredder in the
"Off" position whenever the shredder is unattended or not in
use.
R
REV (REVERSE):
In the unlikely event of a paper jam, the reverse setting can
be used to help clear the cutters of paper that did not pass
through. Never attempt to clear a jam by using the reverse
function until you have emptied the wastebasket.
CONTINUED NEXT PAGE
ENGLISH 7