SPIELWERK SWPS001 Instructions page 9

Please take note of the following assembly instructions to avoid all risk of accidents linked to the
folding and unfolding operations of your scooter (for example: getting your finger stuck).
SCOOTER ASSEMBLY (PAGE 25-26)
A – UNFOLDING THE STEERING COLUMN
Open the rapid tightening lever (11), then push the locking lever forward (5) to unlock the folding
mechanism (10). Then lift up the steering column (9) until it reaches the vertical locking position (you
should hear a "click" of engagement), then firmly tighten the rapid tightening lever (11).
B – POSITIONING THE HANDLES
Take the two handles (1) out of their plastic cover, insert them into the right and left parts of the
stem (7). For each of the two handles, you should hear "click", indicating that the handles are
engaged (1). Check that the two spring buttons (6) are effectively out and visible.
The scooter with suspension, open the handle quick-release lever (2) and follow the instructions
below before tightening it firmly.
C – ADJUSTING THE HANDLEBAR HEIGHT
Open the steering column rapid tightening lever (8), adjust the height of the handlebars until you
hear a "click", indicating engagement in one of the two indexed positions, then firmly tighten the
steering column rapid tightening lever (8).
8 www.DEUBAXXL.de