Numark HF WIRELESS Guide D'utilisation page 5

NFC (Near-Field Communication) (for NFC-enabled devices only)
1. Power on your NFC-enabled device. Make sure that its NFC is on.
2. Make sure HF Wireless is off, and then press and hold the Function Button for 5 seconds.
The blue and red lights will flash quickly, and you'll hear a tone.
3. Touch your enabled device to the NFC logo on HF Wireless.
4. On your device, confirm that you want to connect to HF Wireless.
Your device is now paired to HF Wireless! You can now play audio or make a call.
Multi-Device Bluetooth Pairing
1. Power on your Bluetooth devices. Make sure that they're nearby within range and that
their Bluetooth connectivity is on.
2. Make sure HF Wireless is off, and then press and hold the Function Button for 5 seconds.
The blue and red lights will flash quickly, and you'll hear a tone.
3. In the Bluetooth settings of your first device, select HF Wireless. (If you are prompted to
enter a PIN, enter 0000.)
4. Press and hold the Function Button for 3 seconds to power HF Wireless off.
5. Repeat Steps 2–3 for your second device.
6. On your first device in its Bluetooth settings, select HF Wireless once more.
Both devices are now paired to HF Wireless! You can now switch between each device
without having to repeatedly pair and unpair them. For instance, you can listen to music on
your first device, pause it and accept a call on the second device, and then return to
listening to the first device once your call is done.
To clear all previously paired devices from HF Wireless's memory:
1. Make sure HF Wireless is off, and then press and hold the Function Button for 5 seconds.
The blue and red lights will flash quickly, and you'll hear a tone.
2. Press and hold the Function Button and – button simultaneously for 5 seconds.
5