Beper BB.050 Mode D'emploi page 7

Electric Kettle Use instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Some warnings
The kettle must be used only with its base.
Use it to boil water only.
Do not turn on the kettle without closing the lid.
Turn off the kettle with switch before remove it from the base.
Do never immerse parts of the kettle into water or other liquids.
Do not fill the kettle under the MIN level or over the MAX level.
Before the first use, make sure to rinse the kettle carefully.
Description of the product Fig.A
1. Lid
2. Pouring spout
3. Handle
4. Water level indicator
5. Main body
6. On/Off switch with indicator light
7. Base
Operation
Place the kettle on a flat and stable surface.
Remove the kettle from the base and fill it with water, respecting MIN and MAX levels indicated on the water
level indicator. You can add water by opening the lid or by the pouring spout. Close the lid and put the kettle on
the base. Plug the appliance to the socket.
Press on/off switch downwards, the switch will light on and the kettle start operate. When the switch turn off and
will not light anymore, water is ready to be used.
Lift the kettle only by the handle.
Attention: The kettle becomes very hot and does be touched directly with hands, use pot holder or
oven glove.
Disconnect the power cord form the socket.
7
EN