Important - Bio Green INDIANA 2.0 Mode D'emploi

Installation and operating instructions for air circulation heater INDIANA 2.0
1. Scope of delivery
(A) 1 INDIANA 2.0 air circulation heater
(B) 1 Mounting plate
(C) 1 Plastic bracket for enclosure top
(D) 1 Plastic bracket for enclosure bottom
(E) 1 Exhaust air duct
(F) 2 Flexible aluminium duct 100 cm / ø 8 cm
(G) 2 Hose clamps
(H) 2 Hammer head screws M6 + nuts M6
(I) 6 Self tapping screws
(J) 2 Bolts M5 + nut M5
2. Technical data
Apparatus type:
Power supply:
Power:
Current:
Control range:
Protection category:
Protection class:

IMPORTANT:

Familiarise yourself with the instructions in these operating instructions and the general safety and
hazard notes before installation. Keep this document in a safe place for future reference. If you have
any doubts about the safety of the apparatus, please consult a specialist. When installing in a
greenhouse, please ensure that the electrical connections are made by a qualified person.
3. General
After unpacking and before starting up, ensure that the apparatus and all the accessories are in
good working order. In case of transport damage, please contact the relevant distributor or the
manufacturer immediately. Keep packaging material (polybags, polystyrene, nails etc.) out of reach
of children since such materials are hazardous.
The INDIANA electronic air circulation heater is designed to heat greenhouses and winter gardens
uniformly whilst also saving energy. It is characteristically simple to operate and requires minimum
space for installation. This apparatus is certified for a connection to 230 V ~ / 50-60 Hz alternating
voltage only. It must be protected against heavy soiling and moisture. Any use deviating from that
described above may damage the apparatus and also carries the risk of e.g. short circuits, fire,
electric shock, etc. It is imperative that the safety and installation instructions are followed.
INDIANA 2.0
230 V ~ / 50-60 Hz
1000 / 2000 W
9.5 A (max.)
0 – 26 ° C
II
IP X4 (with flexible aluminium duct)
IP X3 (without flexible aluminium duct)
10
EN