Ktech AL201-1-R-24VDC Mode D'emploi

Ktech
AL201 Overfill Protection Device Weatherproof Alarm
Model AL201-1-R-24VDC Weatherproof Alarm
The Model AL201-1-R-24VDC is a weatherproof alarm panel that accepts a switch contact
input and provides an audible alarm signal when the external contact is closed. The white
pilot light indicates the 24VDC power. The test toggle-switch is a momentary switch that turns
on the red light and the horn when pushed up. The red pilot lights provide the visual alarm
indication for the alarm contact. The mute toggle-switch is a momentary switch that mutes the
horn for the alarm input when pushed down. In the event of a power failure the alarm will
come back on with the power. The red light remains on until the alarm condition is corrected.
The alarm circuit resets automatically. A relay contact output closes when the switch input
opens It must be mounted in a non-hazardous location. Use Ktech float switches for the
.
alarm input contacts.
Electrical Specifications
• 24VDC, 350 mA
• Switch inputs at terminals 3&4
• Relay output at terminals 5&6&7
• Wire Gauge Range is 20-10AWG
• Horn - 95 dB @ 10 feet.
Certified to CSA C22.2 No.205 and Conforms to UL2017
CAUTION: REFER TO INSTRUCTIONS BEFORE OPERATING ALARMS
8 3/4"
222 mm
Ktech Industrial Products, 20 Regan Road, Unit 11, Brampton, Ontario. L7A 1C3
INDUSTRIAL PRODUCTS INC.
236 mm
CAN/ULC-S661-10
24VDC, 350 mA.
T1
24VDC (+)
POWER
9 5/16"
LAMP
W
RELAY
COIL
24VDC (-)
T2
1 2 3 4 5 6 7
LISTED
OVERFILL
PROTECTION
DEVICES
4YC9
EXTERNAL
FLOAT SWITCH
T3 T4
ALARM
LAMP
HORN
R1
Phone (905) 840-7106, Fax (905) 840-6172
TEST
MUTE
SWITCH
SWITCH
R1-1
R2-1 R2-1
RELAY
R2
COIL