Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
Instructions: Turbo Thruster Float Tube Fins
Put your Turbo Thruster Float Tube Fins on before you enter your float tube.
First unclip the heel straps. Locate one of the side-release clips [A] on either side of
the fins. Press hard on the buttons on the top and bottom and pull the strap clip
back out.
Adjust the heel strap by pushing the button [B] on the side of the buckles and
pulling the strap into place. When properly fitted the strap should be snug to your
foot with the raised part of the strap centered behind your heel.
Walk a few steps first and be sure that your fins are on tight and that all the
side-release clips are locked.
CLASSIC ACCESSORIES, INC., KENT, WA USA 98032
©2011
c l a s sic a cce s s o r ie s .c o m
Instructions: Turbo Thruster Float Tube Fins
Put your Turbo Thruster Float Tube Fins on before you enter your float tube.
First unclip the heel straps. Locate one of the side-release clips [A] on either side of
the fins. Press hard on the buttons on the top and bottom and pull the strap clip
back out.
Adjust the heel strap by pushing the button [B] on the side of the buckles and
pulling the strap into place. When properly fitted the strap should be snug to your
foot with the raised part of the strap centered behind your heel.
Walk a few steps first and be sure that your fins are on tight and that all the
side-release clips are locked.
CLASSIC ACCESSORIES, INC., KENT, WA USA 98032
©2011
c l a s sic a cce s s o r ie s .c o m
63227
11cH55_12701
63227
11cH55_12701
no tools
required
no tools
required
Publicité
Manuels Connexes pour Classic Accessories 63227
Sommaire des Matières pour Classic Accessories 63227
- Page 1 Walk a few steps first and be sure that your fins are on tight and that all the side-release clips are locked. no tools required CLASSIC ACCESSORIES, INC., KENT, WA USA 98032 63227 11cH55_12701 ©2011 c l a s sic a cce s s o r ie s .c o m Instructions: Turbo Thruster Float Tube Fins Put your Turbo Thruster Float Tube Fins on before you enter your float tube.
- Page 2 Faites quelques pas tout d’abord et assurez-vous que les palmes sont biens serrées et que les systèmes de fixation à décrochage rapide sont bien verrouillés. no tools required CLASSIC ACCESSORIES, INC., KENT, WA USA 98032 63227 11cH55_12701 ©2011 c l a s sic a cce s s o r ie s .c o m Mode d'emploi: Palmes turbo pour tube de flottaison Mettez vos palmes turbo pour tube de flottaison avant de monter à...