Wiha 45219 Mode D'emploi page 31

USER'S MANUAL
Feature
NCV
LPF
Overvoltage cat.
Backlight
Torch light
LPF -3dB freq.
Technical data refer to 23 °C ± 5 °C at < 80% rel. humidity
Temperature coefficient 0.15 x specified accuracy per 1°C (<18 °C and > 28 °C)
* The lowest range is specified from 5% of range to 100% of range.
1
* Signal BW 40 Hz ... 1 kHz
2
* If signal is mixed (AC + DC) only pure AC component will be taken into account
3
* Frequency of AC current up to 400 Hz
4
With increasing frequency (over 400 Hz) accuracy decreases
*
5
* Specification is valid for capacitance > 10 nF
6
* Maximum measurement time is 15s
7
Service and warranty
Should the device no longer work, should you have any questions or require informa-
tion, contact an authorised customer service point for Wiha power tools:
Customer care
Wiha Werkzeuge GmbH
Obertalstraße 3 – 7
78136 Schonach
GERMANY
The warranty is voided in the event of injury or damage to property caused due to
non-compliance with these instructions. The manufacturer accepts no liability for
consequential damage!
30
Range*
1
+
+
CATIV 1000 V
+
+
1 kHz
Tel.: +49 7722 959-0
Fax: +49 7722 959-160
Email: info.de@wiha.com
Website: www.wiha.com
Basic accuracy