AP 7007
TROUBLE-SHOOTING
Faults can occur on all electrical equipment. This must not necessarily be due to a defect in the device itself.
So check first with table if the fault can be dealt with.
PROBLEM
Weak suction.
Device does not work.
The device cover does not close
properly.
Danger! Never try to repair a defective device, or a device you believe to be defective by yourself. You
can put both yourself and future users in danger. Repairs may only be carried out by authorized specialists.
Disposal of old electrical appliances
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the impact on human health and the
environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage
Directive 2014/35/EU and the requirements of the EMC directive 2014/30/EU.
All manuals and user guides at all-guides.com
POSSIBLE CAUSES
The secondary valve is open.
An object is blocking the suction
pipe.
Filters are not fitted properly or
are blocked.
Device is not properly plugged
into the mains.
Dust container is not set properly.
SOLUTIONS/TIPS
Close secondary valve.
Check the suction tube, the
handle area, suction pipe and the
nozzle in use for blockages.
Fit filter well.
Check that the mains plug has
been inserted properly. Also
check whether the power socket
is in order (e.g. use an electric
torch). Check the fuses, automatic
fuse in the fuse box.
Check the dust container fit.
16