Getting To Know The Settings - Philips AVENT SCF293 Mode D'emploi

Getting to know the settings

Note: Before you sterilize bottles and other items, clean them first.
Only place items in the sterilizer which are suitable for sterilizing� Do not sterilize items that
are filled with liquid, e.g. a teether with cooling fluid.
Sterilize
Auto
Dry
• Sterilize mode is for sterilizing baby items�
• A sterilizing cycle takes approximately 10 minutes.
• Heating up takes approximately 4 minutes and
sterilizing takes approximately 6 minutes�
• Make sure to pour exactly 130 ml/4�5 oz water
directly into the water reservoir of the base �
• Auto mode is for sterilizing and drying baby items in
one go�
• An auto cycle takes approximately 40 minutes.
• When you use the "Auto" mode, the appliance starts
sterilizing first and then drying will start automatically.
The sterilizing cycle takes approximately 10 minutes,
and the drying cycle takes approximately 30 minutes.
• Make sure to pour exactly 130 ml/4�5 oz water
directly into the water reservoir of the base �
• Dry mode is for drying baby items�
• A drying cycle takes approximately 30 minutes.
• When you dry baby items, do not add water to the
water reservoir of the base�
- English 7 -