Drainastim Pro UFM001- 1 Manuel D'utilisation page 42

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

UK
42
Squeeze the connectors until there is no more space inside
them.
Leaving an empty space can cause discomfort.
e.
Plug the other end of the TENS electrode cable into one of
the sockets provided on the side of the
If you are using two pairs of TENS electrodes, repeat this step for
the other cable.
f.
First time use only: Remove the plastic film from the TENS
electrodes by peeling it off carefully and discarding it.
g.
Apply the TENS electrodes to the area(s) where you want
to apply electrical stimulation, as shown on page 41, by gen-
tly pressing the adhesive side onto the skin.
h.
Switch on the
Drainastim Pro
right and press the power button or use the remote control to
turn on the
Drainastim
You will hear a beep and the settings on the control panel display
will light up.
Drainastim Pro
To turn off the
press the ON/OFF power button.
USE OF BODY PADS
Drainastim
with the power switch on the
Pro.
at any time during use, simply
Pro.

Publicité

Table des Matières
loading

Table des Matières