Cleaning And Maintenance; Parts Description; Before The First Use - Eden ED-7005 Mode D'emploi

This symbol is used for marking materials intended to
come into contact with food in the European Union as defined in
regulation (EC) No 1935/2004.
The product and packaging materials are recyclable,
subject to extended manufacturer responsibility. Dispose it
separately, following the illustrated packaging symbols, for better
waste treatment. The Triman logo is valid in France only.

Cleaning and maintenance

• Before cleaning, unplug the appliance and
wait for the appliance to cool down.
• Never immerse the device in water or any
other liquid. The device is not dishwasher
proof.
• Clean the pan and aeroplate (removable
grid) with hot water, some washing-up liquid
and a non-abrasive sponge. The pan and
aeroplate (removable grid) are not
dishwasher-proof.
• If dirt is stuck to the aeroplate (removable
grid) or the bottom of the pan, fill the pan
with hot water with some washing-up liquid.
Put the aeroplate (removable grid) in the
pan and let the pan and the grid soak for
about 10 minutes.
• Clean the appliance with a damp cloth.
Never use harsh and abrasive cleaners,
scouring pad or steel wool, which damages
the appliance.

PARTS DESCRIPTION

1. Air inlet
2. Display
3. Removable grid (do not use without this grid)
4. Pan
5. Handle
6. Air outlet openings

BEFORE THE FIRST USE

• Remove all packaging material.
• Remove any stickers or labels from the appliance.
• Thoroughly clean the parts with hot water, some washing-up
liquid and a non-abrasive sponge.
• Wipe the inside and outside of the appliance with a moist cloth.
• Place the appliance on a stable, horizontal and level surface, do
not place the appliance on non-heat-resistant surfaces.
Instruction manual
EN
5