Cutting
Folding
D4
USER GUIDE
The SUPERTOOTH D4 is a portable, wireless, rechargeable stereo speaker
featuring the convenience of NFC technology for instant pairing to a compatible
mobile device.
Users can stream music wirelessly from any cell phone, tablet, computer, laptop
or Mp3 player supporting Bluetooth A2DP.
The SUPERTOOTH D4 kicks out 8 watts RMS audio power and has a high
The integrated rechargeable batteries ensure 2 to 3 hours of non-stop,
maximum-volume music, and up to 12 hours of moderately played melodies.
Bluetooth Compliance :
- Stereo music streaming
- NFC
Operating Range :
10 meters Bluetooth standard
Frequency :
2.4 GHZ
Battery and Battery Life :
- Battery type : Lithium-Ion Power pack
- Music playing time (maximum volume level) : 2 to 3 hours
- Music playing time (medium volume) : 12 hours
- Stand-by time : 1500 hours
- Charging time : 2 hours
Audio Features :
- 8 Watts RMS power
- Compatible with any Bluetooth A2DP phone, PC, latop, tablet or Mp3 player
- Jack 3.5 auxiliary input for non Bluetooth A2DP Mp3 players, iPods or computers
- Wireless Play / Pause (AVRCP standard)
Multipairing :
- Maximum 8 phones paired
- 1 phone connected at a time
Pantone 286 C
SUPERTOOTH D4 - NFC pairing *
1. Turn "ON" the D4
2. Place and maintain your NFC supported phone on top of the speaker (see image
above).
3. The speaker will go to pairing mode (a pairing beep will be heard on the speaker and
(2)
the LED Indicator
will turn red / blue alternately) and your phone will prompt for
pairing connection.
remove your phone from the speaker.
5. Pairing is successful if the LED Indicator
6. The D4 is now ready to use with your phone.
(*) Please make sure your phone supports NFC to pair it this way with the D4. If it doesn't, please refer to Standard
pairing section below. For further information please visit : http://nfc-forum.org/
SUPERTOOTH D4 - Standard pairing
1. Put the D4 in pairing mode by pressing the MFB Button
on the speaker and the LED Indicator
2. While the D4 is in pairing mode, access the Bluetooth menu of your phone / device.
your phone / device's manual).
3. When the phone / device displays the list of Bluetooth devices, select DISCO4.
4. If the phone / device asks for the password / pin code, enter 0000 and press OK.
Size and Weight :
- Height : 126 mm
- Width : 159 mm
- Depth : 120 mm
- Weight : 504 g
Accessories :
- USB to micro-USB cable
- 3.5 mm stereo jack cable
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems). This marking shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
This product has an embedded, non-replaceable battery, do not attempt to open the product or remove
the battery as this may cause injury and damage the product. Please contact the local recycling facility for
removal of the battery. The embedded, non-replaceable battery is designed to last the life time of the
product.
Hereby, EURO COMMUNICATION EQUIPEMENTS, represented by Xavier MARCHANT, CEO, declares that
the SUPERTOOTH D4, MODEL BTD4, is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity.
5. Pairing is successful if the LED Indicator
6. The D4 is now ready to use with your phone / device.
SUPERTOOTH D4 - Button functions
(1)
MFB Button
• From Off, press for 3 seconds to power On
• From On, press for 3 seconds to power Off
• From Off, press for 8 seconds to go to pairing mode
• From On, press for 5 seconds to go to pairing mode
• Short press to reconnect to the last paired phone / device
(2)
blinks blue every 3 seconds.
• From pairing mode, double press to clear the pairing list
(2)
LED Indicator
• Steady red: charging
• Steady green : battery full
• Blinking red / blue : in pairing mode
• Blinking blue every 3 seconds : connected
(1)
until a pairing beep is heard
• Blinking green : disconnected
(2)
turns red / blue alternately.
• Blinking violet : erasing pairing list
(3)
Charge Port (micro USB)
(4)
Stereo Line Input
• 3.5 mm Jack connection
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Euro-CB is under license. Other trademarks and trade names are those of their respective owners.
Federal Communications Commission (FCC) Statement
Industry Canada (IC) Statement
15.21
could void the user's authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC/IC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipmen
following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s)
Operation is subject to the following two conditions :
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired operation of the
device.
FCC/IC RF Radiation Exposure Statement :
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the
must not be co-located or operating in conjunction with any other antenna or transmitter.
(2)
blinks blue every 3 seconds.
Rear view of the SUPERTOOTH D4
(1)
(2) (3) (4)
For the whole declaration please visit :
http://www.supertooth.net/download
Euro Communication Equipements SAS
Route de Foix D117
11500 NEBIAS (FRANCE)