Table des Matières
Publicité
1. General instructions for safe operation.
Read all instructions carefully. Failure to follow the instructions below may result in electric shock, fire and / or serious injury.
Keep these instructions in a safe place.
1.1. Safety at work.
1.1.1. Keep your workplace clean and well lit. Crash and inadequate lighting can contribute to the occurrence of an accident at
work.
1.1.2. Do not operate the machine in potentially explosive environments, near flammable liquids, gases or dust. During work,
sparks are released in the machine and can ignite dust or vapors.
1.1.3. Keep children and side faces at a safe distance while operating the machine. If your attention is diverted, you may lose
control of the machine.
1.2. Electricity safety.
Protect your machine from rain and moisture. The penetration of water into the machine increases the risk of electric shock.
1.3. Safe way of working.
1.3.1. Stay focused, keep a close eye on your actions and act cautiously and reasonably. Do not use the machine when you
are tired or under the influence of narcotics, alcohol, or drugs. An instantaneous distraction when operating a machine can result in
extremely severe injuries.
1.3.2. Work with protective clothing and always with safety glasses. Wearing personal protective equipment, such as breathing
mask, tight, tightly closed shoes with a stable grapple, protective helmet or silencer (anti-footer), reduces the risk of an accident at
work.
1.3.3. Avoid the risk of the machine being switched on inadvertently. Before connecting the plug, make sure the starter switch is
in the "off" position. If, when carrying the machine, you hold your finger on the breaker, there is a risk of an accident at work.
1.3.4. Before turning on the machine, make sure you remove all the tools and wrenches from the machine. A helper forgotten
on a rotating unit can cause injuries.
1.3.5. Avoid the unnatural positions of the body. Work in a stable position of the body and at any moment maintain balance. This
will allow you to control the machine better and safer if an unexpected situation arises.
1.3.6. Work with appropriate clothing. Do not work with wide clothing or jewelery. Keep your hair, clothes, and gloves at a safe
distance from the rotating units of the machines. Wide clothing, ornaments, long hair can be captured and dragged by rotating units.
1.3.7. If it is possible to use an external aspiration system, make sure it is on and functioning properly. The use of an aspiration
system reduces the risks due to the dust released.
1.4. Careful attitude to machines.
1.4.1. Do not overload the machine. Only use machines according to their intended purpose. You will work better and safer when
using the right machine in the load range specified by the manufacturer.
1.4.2. Do not use a machine whose breaker switch is damaged. A machine that can not be switched off and switched on as
intended by the manufacturer is dangerous and needs to be repaired.
1.4.4. Keep the machines in places where they can not be reached by children. Do not allow them to be used by people who
are unfamiliar with the way they work and have not read these instructions. When in the hands of inexperienced users, machines
can be extremely dangerous.
1.4.5. Maintain your machines with care. Verify that the movable units work flawlessly, do not clamp, have broken or damaged
parts that break or change the functions of the machine. Before using the machine, make sure the damaged parts are repaired.
Many accidents at work are due to poorly maintained machines and appliances.
1.4.6. Keep the cutting tools always well sharpened and clean. Well-maintained cutting tools with sharp edges have less
resistance and are easier to work with.
1.4.7. Use the machines, accessories, tools, etc., according to the manufacturer's instructions. Also keep in mind the specific
working conditions and operations you must complete. Using a machine other than the applications provided by the manufacturer
increases the risk of accidents at work.
2. Usage
Please keep in mind that this saw is not designed for use in commercial or industrial applications.
9
Publicité
Table des Matières
