OXFORD BABY LAZIO 11788 Instructions D'assemblage page 4

THIS STEP REQUIRES :
B. Slat (3 pcs)
(C) AllenBolt 3/4" (20 mm) (2 pcs)
STEP 2.1:
- After attaching Rails (A) to headboard and footboard, place Slat (B) on
the support strip of Rail (A), fasten both ends of Slat (B) with screw (D).
Tighten all Screws by Screw Driver (unsupplier).
STEP 2.2:
- Insert Allenbolt 9/16"(15 mm) (C), through the top hole in the headboard from
the inside and connect with nut 3/4" (20 mm) (E).
Tignten all bolts and nuts with Allen key (F). Assembly complete. Thank you!
90-11788-V-01
STEP 2 " ASSEMBLY OF SLATS"
(F) Allen key (2 pcs)
(D) Screw 1 1/4"(32 mm) (6 pcs)
STEP 2.2
4 of 4
SCREW DRIVER (Not Included)
(E) Nut 3/4" (20mm) (2 pcs)
E
C
F
D
STEP 2.1