Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DE GB NL FR
Technical specifications
5L non-pressure boiler
Model Wahlbach
Wall mounting
Construction
Material Anschluss
Distance, pipe to wall
Electric supply
Nominal capacity
Nominal volume
Total quantity of mixed water
Temperature range
Cable size
Maximum recommended water volume
Non-usage consumption/ day
Protection class
IP rating
Dimensions (h x w x d)
Weight when empty
Water connection
Operating pressure
3.
USER INSTRUCTIONS
The device must be filled with water before connec-
tion to the electrical supply!
When powering up for the first time, you must verify that
the temperature indicator (light) extinguishes when the re-
quired temperature is reached (the device has reached the
set temperature). The device only switches on again if the
temperature falls below this setting. (See troubleshooting)
When filling for the first time, the hot water valve in the low-pressure tap fitting must be
open so that water can flow into the device. If the device is not filled with water before-
hand during installation, the automatic safety device will activate and switch off the ap-
pliance. (See troubleshooting instructions on how to act in the event of a fault.)
14
OTS 5
Over-sink
Vertical
Open
Brass
92mm
230V, 50Hz
2,0kW
5,3L
9,1L
35 - 75°C
1,0mm²
5,0L/min
0,32kWh
I
IP24
274x185x421 mm
2,5kg
G½"
0MPa
UTS 5
Under-sink
Vertical
Open
Brass
92mm
230V, 50Hz
2,0kW
5,3L
9,1L
35 - 75°C
1,0mm²
5,0L/min
0,32kWh
I
IP24
274x185x421 mm
2,5kg
G⅜"
0MPa
Publicité
Table des Matières
