Publicité
M.2 SSD: How to Install the M.2 SSD with the Heasink (M.2 Key M Socket (2280))
C
如何安裝 M.2 / SSD So installieren Sie die M.2-SSD / Comment installer le SSD M.2 / Come installare l'unità SSD M.2 / Cómo instalar el disco de estado sólido M.2 /
M.2 / Como Instalar o SSD M.2 / M.2 SSD를 설치하는 방법 / M.2 SSD の取り付け方法
1. Gently insert the M.2 module, along
2. Remove the membrane from heatsink.
Align the heatsink to the edge of the
the guiding tabs, into the heatsink
bracket and press down the heatsink
bracket.
into the bracket.
SO-DIMM Slots: How to Install the Memory Modules and the Heatsinks
D
如何安裝記憶體模組及散熱片/
1. Carefully insert the SO-DIMM memory modules
2. Push down until the modules snap into place.
into the slot at a 30-degree angle.
Note:
-
e iEP-5000G Series requires DDR4 SO-DIMM (1.2V).
- For dual channel con guration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 SO-DIMM pairs.
2.5-inch Hard Drive: How to Install the Hard Drive
E
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
1. Remove the screws and then remove
2. Attach the HDD to the HDD bracket
the front cover.
and secure it with four screws.
connect the SATA cable to the HDD.
Note:
e HDD Bracket is not provided.
Please purchase it seperately if needed.
e terms HDMI® and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
4.
en reinstall the front cover.
3. Carefully insert the M.2 Module
4. Tighten the screw to secure the
with heatstink into the slot.
M.2 module and the heatsink to
the motherboard.
(DDR4 Low Voltage (1.2V))
3. Remove the membrane from heatsink.
en paste the heatsink onto the module.
(Basic SKU only)
3. Attach the HDD assembly to the front cover
and secure it with four screws.
en
connect the SATA Data and Power Cable to
the motherboard.
How to Install the SIM Card and the Micro SD Card
如何安裝SIM卡及Micro SD卡/
1. Release the screws on the iEP-5000G Series
and remove the SIM/Micro SD Card slot cover.
How to Install the Wall Mounting Brackets (Optional)
如何安裝壁掛架 / So installieren Sie die Wandmontagehalterungen / Installation les supports de montage mural / Come installare
le sta e di montaggio a parete / Cómo instalar los soportes para instalación en pared /
/ Como instalar as braçadeiras de montagem na parede / 벽면 마운팅 브래킷을 설치하는 방법 / 壁取り付けブラ
ケットの設置方法
1. Attach the wall mounting brackets to
the iEP-5000G Series and secure it with screws.
How to Install the Din Rail Mounting Bracket (Optional)
/
如何安裝 DIN 導軌安裝托架 (選購) / So installieren Sie die DIN-Schienenmontagehalterung
(optional) / Installation du support de montage sur rail DIN (en option) / Come installare la sta a
di montaggio su guida DIN (opzionale) / Cómo instalar el soporte para instalación en riel DIN
(opcional) /
Como instalar a braçadeira de montagem do trilho DIN (Opcional) / 딘 레일 마운팅 브래킷을
설치하는 방법(선택 사항) / DINレール取り付けブラケット（別売）の設置方法
Attach the Din Rail Bracket to the iEP-5000G Series and secure it
en
with screws.
en you can place the iEP-5000G Series to the Din Rail.
Positions of the iEP-5000G Series
iEP-5000G Series系列擺放 / Positionen der iEP-5000G Series / Positions de la série iEP-5000G Series
/ Posizioni della iEP-5000G Series / Posiciones de la iEP-5000G Series /
Series / Posições de iEP-5000G Series / iEP-5000G Series 시리즈의 위치 / iEP-5000G シリーズの位置
e iEP-5000G Series should be placed in vertical position only.
SIM Card
Micro SD Card
2. With the gold contacts facing front,
carefully insert the SIM Card or the
SD Card into the designated slot until
it clicks.
2.
en you can attach the iEP-5000G Series
to the wall with screws.
How to Install the 5G Module Heatsink (Optional)
如何安裝 5G散熱片 (選購)
DIN (
) /
1. Remove the membranes on the both sides of the 5G heatsink.
2. Attach the 5G Heatsink to the internal side of the front cover and
secure it with screws.
iEP-5000G
3. Place the cover back and secure it to the
iEP-5000G Series with screws.
Dimension of the iEP-5000G Series
with Wall Mounting Bracket Installed
100mm
86mm
53mm
42mm
Vertical Position
Publicité
