Videx 2313 Instructions D'installation

Accessories
Art. 2313
Remote relay for VX2300 system
87,5 mm
Fig. 1
DESCRIPTION
Remote relay for VX2300 system.
All entrance panels on the VX2300 system include the lock re-
lease relay and push to exit button input inside the entrance
panel. For higher security applications including installations in
compliance with 'Secured By Design' the 2313 enables the relay
and push to exit button input 1 to be installed in a secure loca-
tion away from the entrance.
There is also a second relay that can be activate pressing the
service button present in every VX2300 phone or videophone.
MOUNTING INSTRUCTIONS
1. Remove the terminal side covers by unscrewing the retaining
screws (Fig. 3).
2. Fix the device to a DIN rail (Fig. 4) or directly to the wall using
two expansion type screws (Fig. 5).
3. Isolate the mains using the circuit breaker mentioned above
then make the connections as shown on the installation dia-
grams (if provided).
4. Check all connections and secure the wires into the terminals;
5. When all connections are made replace and fix the terminal
covers with the relevant screws (Fig. 6).
6. Restore the mains.
Art. 2313 - Installation instructions
66 mm
A
B
A
LEGEND
A
B
C
D
Fig. 3
Fig. 5
- 1 -
Fig. 2
Connection terminals covers
Dip-switch cover
Connection terminals
8 way dip-switch
C
C
1
2
Fig. 4
Fig. 6
66251215 - V1.0 - 01/06/22
D