Sleep Function; Warranty Information - RCA RC127i Guide De L'utilisateur

Table des Matières

Publicité

walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
• Only use attachments/accessories
Bottom view
ess
ess
Attached 3.5mm cable – Connect to
your auxiliary source
Rear view
FM antenna
Power
POWER – Connect to the power
adapter

Sleep function

In the sleep mode, the radio and aux
can be set to operate for a certain
• Do not use unauthorized chargers
or power adapters. Use only
chargers that came with your
product or that is listed in the user's
guide.
Clock
Setting clock
1. In standby mode, press and hold
SET CLOCK (STORE) until the hour
fl ashes on the display.
2. Press
/
to adjust the hour time.
The PM indicator lights to show PM
time. Press SET CLOCK (STORE) to
shift to minute time. Press
/
adjust the minute time and then
press SET CLOCK (STORE) to save
or wait for about 5 seconds until
the hour and minute stop fl ashing.
Radio
Listening to the radio
To turn on or off radio:
• In standby mode, press
RADIO • AUX to switch to radio
mode.
• Press OFF to return to standby
mode.
To tune frequency:
• In radio mode, press
/
. The
selected frequency shows on the
display.
• Press and hold
/
to
automatically search for the
previous/next available station.

Warranty information

12 Month Limited Warranty
Applies to RCA Clock Radios
openings with items such as
newspaper, table-cloths, curtains etc.
• No naked fl ame sources such as
lighted candled should be placed on
the apparatus.
Radio
FM Antenna
The Built In Automatic Frequency
Control (AFC) helps to reduce drift
on FM reception and keeps the radio
locked in on the FM station to which it
is tuned.
This unit is equipped with an FM
to
antenna at the back. Uncoil the antenna
to its full length for best reception. Tape
the end of the antenna onto the wall if
possible to improve reception.
Station presets
To store a station as preset:
1. Tune to a radio station.
2. Press STORE, an available preset
location (e.g. P01) shows on the
display.
3. Press
/
to select a desired preset
location (01 - 20).
4. Press STORE. You can save up to 20
preset stations.
To recall a preset station:
1. In radio mode, press RECALL.
• The existing preset station number
shows on the display.
2. Press RECALL repeatedly to select a
desired preset station.
REPLACEMENT PROVIDED ABOVE AND,
IN NO EVENT, SHALL THE COMPANY'S
This Class B digital apparatus
complies with Canadian ICES-003.
Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
Auxiliary source
1. Unwind the attached 3.5 mm cable
at the bottom panel of the unit as
shown.
4
5
3
1
2
2. To select auxiliary mode, connect
your auxiliary source (e.g. mp3
player) to the attached 3.5 mm
cable.
3. The RADIO • AUX button is used
to cycle between Radio mode and
Aux In mode. Press the button once
or twice until you hear the Aux In
source.
Alarm functionality is
not supported through
the aux in cable. If you
choose to wake using an
alarm app or your phone's
alarm function you must
either 1) remove the 3.5mm
cable from your phone or 2)
leave the clock radio in aux
mode before falling asleep.
with factory default settings. Consumer
will be responsible to restore any
personal preference settings.

Publicité

Table des Matières
loading

Table des Matières