Product Overview; How To Use - HOTO QWLSD001 Mode D'emploi

01 Product Overview

Read this manual carefully before use, and retain it for future reference.
Thank you for purchasing the HOTO 3.6V Cordless Screwdriver.
1
Screwdriver Bit
2
Bit Holder
3
Light
4
Torque Knob

02 How to Use

Turning the product on/off
Turn the torque knob to level I, II, or III
then press the forward/reverse
rotation bu on to start the
screwdriver.
Release the forward/reverse rotation
bu on to pause the screwdriver.
Turn the torque knob to OFF and the
screwdriver will turn off.
Turning the light on/off
The light automatically turns on
when the screwdriver is turned on.
The light will turn off 10 seconds
a er the forward/reverse rotation
bu on is released.
The light will turn off when the
torque knob is turned to OFF.
Forward/Reverse rotation bu on
Press the
bu on to tighten a screw.
Press the
bu on to remove a screw.
Torque knob
When the torque knob is set to level I, it is in low torque mode.
When the torque knob is set to level II, it is in medium torque mode.
When the torque knob is set to level III, it is in high torque mode.
Indicator status
If the ba ery level drops below 20% when the screwdriver is in
use, the indicator will blink red quickly, and it will turn off three
seconds a er the bu on is released.
When charging, the indicator will slowly blink white.
When the ba ery is fully charged, the indicator will stay white.
This screwdriver is equipped with a universal Type-C
charging port, and comes with a USB charging cable.
end of the rotation
end of the rotation
5
Forward/Reverse rotation
bu on
6
Charging Indicator
7
Type-C Charging Port
3
4
5
6
7
1
1
2