Accessories - Dedicated Micros Dennard drx 400-II Manuel D'installation

Telemetry Receivers
Dennard drx 300
Dennard drx 400
Dennard drx 400dc
Telemetry Transmitters
Dennard dtx 300
Dennard dtx 400
Dennard dtx 400pj
Dennard dtx 500
(Keyboards)
Dennard dtx 1000
Dennard dtx 1000pj
(Base Units)
Dennard dtx 1000/8
Dennard dtx 1000/16
Dennard dtx 1000/AL8
Dennard dtx 1000/AL16

Accessories

Dennard dtx LD
Dennard drx 24 a.c. psu.
Dennard drx 400-II Installation Manual
Pan, Tilt, Zoom, Focus, Iris and one Auxiliary a.c. Receiver.
Pan, Tilt, Zoom, Focus, Iris, Four Auxiliaries and Sixteen Presets a.c. Receiver.
Pan, Tilt, Zoom, Focus, Iris, Three Auxiliaries and Sixteen Presets Eight Alarms a.c.
/ d.c. Receiver.
Single Channel Transmitter "Up the coax" or 20 mA current loop Telemetry Signals.
Single Channel Transmitter with Presets Support, "Up the coax" or 20 mA current
loop Telemetry Signals.
Single Channel Transmitter with Presets Support and Proportional Joystick and "Up
the coax" or 20 mA Current Loop Telemetry Signals.
Eight Channel Transmitter with Presets Support ,One Alarm input, One Monitor,
Video Switching and "Up the coax" Telemetry Signals.
Multi-Channel Transmitter comprising Keyboard & Base Unit,
Preset Support, Tw Monitors, Video Switching, optional proportional joystick and
"Up the coax Telemetry Signals. This system is available in four main variants as
follows:-
Eight Channel with optional 20 mA current loop Telemetry Signals.
Sixteen Channel with optional 20 mA current loop Telemetry Signals.
Eight Channel, Sixteen Alarm inputs with optional 20 mA current loop Telemetry
Signals.
Sixteen Channel, Sixteen Alarm inputs with optional 20 mA current loop Telemetry
Signals
RS232 Keyboard Line Driver
24 Volt a.c. Power Supply for converting standard 230 Volt a.c. receivers to
24 Volt a.c.
Page. 10