Jackery SolarSaga 200 Mode D'emploi page 2

Technical Parameters
Product Name
Model
Peak Power
Power Voltage
Power Current
Open Circuit Voltage
Short Circuit Current
Operating Temperature Range
Dimensions (unfolded)
Dimensions (folded)
Safety Tips
* Do not flex or bend the folding solar panels.
* Do not place folding solar panels in shading places, while tree shades, buildings, and any other
obstructions should be minimized.
* Do not soak the solar panels in water or other liquid.
* Do not clean the solar panel with water, please gently wipe it with a damp cloth.
* Do not use or store solar panels near open flames or flammable materials.
* Do not scratch the surface of solar panels with sharp objects.
* Prevent corrosive substances to damage solar panels.
* Do not step on or place heavy objects on the solar panels.
* Do not disassemble the solar panels.
* The output circuit of the solar panels must be correctly connected to the equipment. Please do not
short-circuit the positive and negative poles. Ensure that there is no gap between the connector and
the insulated connector. If there is a gap, sparks or electrical shocks will occur.
* Check the connection status of each component, including cables, wires and plugs.
Customer Service
24 - month limited warranty
Lifetime technical support
hello@jackery.com
1-888-502-2236丨Mon-Fri 9:00-6:00 PST (US)
EN
Jackery SolarSaga 200
JS- 200A
200W
18V
11.12A
23.2V
11.76A
-10-65℃ (14-149℉）
540x2320x25mm
540x615x40mm
Warranty
The product is covered by a limited warranty from Jackery for the original purchaser that
covers the product from defects in workmanship and materials for 24 months from the
date of purchase (damages from normal wear and tear, alteration, misuse, neglect,
accident, service by anyone other than authorized service center, or act of God are not
included).
During the warranty period and upon verification of defects, this product will be
replaced when returned with proper proof of purchase.
Frequently Asked Questions
Q: What kind of battery can be charged by these solar modules?
1. Jackery Explorer series
2. Sealed lead-acid battery
3. Colloidal lead-acid batteries
4. The open lead-acid batteries
Q: How to clean the solar surface?
Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth
to wipe the surface of the solar module to remove any remaining dust or dirt. Any guano or
other adhesive should be removed as soon as possible from the solar surface to avoid a
reduction in performance.
Q: Are the foldable solar modules waterproof?
Yes， the product meet IP67 water proof， which maximize the lifespan of the module, it
should not get wet.
Contact us
For any inquiries or comments concerning our products, please send an email to
hello@jackery.com, and we will respond to you as soon as possible. If there is any quality
related issue with the product, you may request a replacement or refund by submitting a
request form at www.jackery.com/support/.