Publicité
Liens rapides
Publicité
Sommaire des Matières pour Piston FENDER
- Page 1 PISTON ® FENDER KIT ASSEMBLY ASSEMBLY VIDEO...
- Page 2 Parts (2) Fender Kit Strap FENDER KIT FIT GUIDE No Fender Kit 12:00 Fender Wheelbase: Normal Tire Chock: Normal Fender Kit 12:00 - 3:00 Fender Wheelbase: 45in Max 47in Max if tire width is less than 2” Tire Chock: Use the highest position possible that doesn’t hit...
- Page 3 OneTap Operation Open each arm by tapping the OneTap levers. Stand back and watch! Each arm will fully open automatically. Do not hold the levers while operating. OneTap Lever Stand clear of automatic arms to avoid impact.
- Page 4 Setup & Loading Push tabs inward and slide tire cradle down into holes marked Fender Kit Only for rear tire. Front tire arm will stay at normal tire size position. Tabs 29” | 700c 27.5” | 650b 26” 24” 20”...
- Page 5 With bike in position, close arms onto tires until firm contact is made with cradles. Ensure tire cradles make contact with tires. Insufficient contact could result in bicycles becoming loose during travel. Each arm requires at least 1 click of engagement to ensure safe transport.
- Page 6 Secure rear wheel with Fender Kit velcro straps. Repeat steps 4 and 5 around bottom wheel and tray.
-
Page 7: Avertissements
• Conduzca responsablemente. AVERTISSEMENTS • Suivez les instructions pour un assemblage, une installation et une utilisation appropriés. • Ne transportez pas de bicyclettes avec des garde-boue ou des porte-bagages sans utiliser le kit de garde-boue Piston • Conduisez de manière responsable. kuatracks.com info@kuatracks.com... - Page 8 Küat Limited Lifetime Warranty Innovations LLC. Küat honors the warranty on all Küat brand products for original owners of the product. Warranty is not transferable. If a Küat rack that is covered by the terms of this warranty and is determined by Küat, to be defective, Küat will repair or replace the defective parts.
- Page 9 Notes:...
- Page 10 1.877.822.5828 info@kuat.com V.04 kuat.com...