Manhattan 180559 Instructions page 2

This keyboard can connect to three devices at once: two through Bluetooth and one
through the USB receiver. See step 3 to connect/pair different devices.
1
1 Insert 2 AAA batteries (included) into the battery compartment
on the back of the keyboard and replace the cover.
2 Set the power switch to ON.
3 Connect/pair devices. NOTES: Once connected, confirm your device type by
pressing Fn + Q for iOS/macOS, Fn + W for Android, or Fn + E for Windows.
Switch between devices using the funtions in the Functions table. The first paired
device is Bluetooth 1 (a). The second paired device is Bluetooth 2 (b). To add a
different device, "forget"/unpair/remove the keyboard before repeating the steps
to pair to a new device. For connection issues or failures, unpair/remove this
device from your Bluetooth device list and repeat the steps to pair it again.
• Connect via 2.4 GHz USB receiver: This connection
is Plug and Play; no driver is required.
» Press the CONNECT button on the underside of the keyboard. Then press Fn + 3.
» Take the wireless receiver from the keyboard's underside and plug it into an
available USB port on your computer (Note: complete step while LED flashes).
» Wait 30 seconds for the receiver to work.
• Pair via Bluetooth:
Mac/iOS/Android
» Go to your device's Bluetooth Preferences/Settings. Make
sure Bluetooth is turned on in your device.
» Press the CONNECT button on the underside of the keyboard
and select BLE Keyboard/BT Keyboard from the device list
when it appears. Confirm pairing if a dialog box appears.
» Complete the installation by pressing the hotkey combination
for your device type: Fn + Q for Mac/iOS or Fn + W for
Android. To pair a second device, repeat these steps.
2
English
:
2 3
Instructions
a b