Location Of Controls; Ac Power Source; Dc Power Source; Radio Operation - Bigben TR101 Manuel D'utilisation

MAIN UNIT
1. Handle
2. Speaker
3. Tuning knob
4. Frequency Indicator
5. Volume/ ON-OFF control

AC POWER SOURCE

This Unit is designed to operate at 230V ~ 50Hz household power source. Do not attempt to operate the
system using other power sources. This may result in damage to the unit and void your warranty.
Use the AC cord to connect the unit with the power supply. Turn the knob VOLUME clockwise until the power
and the amber light are on.

DC POWER SOURCE

This unit supports DC power source. Put four "C" (UM-2) type batteries into the battery compartment. Turn the
knob VOLUME clockwise until the power and the amber light are on.
NOTICE:
Before installing batteries (not included), ensure that the AC cord disconnected from the mains unit.

Remove the battery door on the back of the unit carefully by pushing the battery door. Fit the
1.5V(UM 2) x 4pcs batteries(not included) referring to the polarity markings

RADIO OPERATION

Slide the AM / FM band selector to select AM or FM band.
Turn the tuning knob to adjust the frequency of the desired radio station.
When you do not want to listen to the radio, turn the VOLUME knob anticlockwise until it clicks to turn off
the radio.

LOCATION OF CONTROLS

6. Band selector (AM / FM)
7. Phones Jack
8. Battery compartment
9. FM Antenna
10. AC socket
4