Pur Line HOTI T55 Manuel De L'utilisateur page 12

HEATING LEVEL
Press once to low power (1000W)
Press again to high power (2000W)
Press 3rd time to fan function.
TIMER
Press repeatedly to increase the operating time. The timer can be set between 0 and 12 hours. The
display will show the currently set duration.
SWING
Press to activate the swing function, the horizontal direction of the airflow moves slowly from side to
side and the swing indicator lights up. Press again to deactivate this function.
TEMPERATURE
Press repeatedly to adjust the room temperature (from 15 to 45°C), if the room temperature reaches
the set temperature, the heating will stop, if the room temperature is below the set temperature, the
heating will turn on.
FLAME EFFECT
Press to turn the flame effect on or off.
REMOTE CONTROL
The remote control has the same functions as the control panel.
The remote control is powered by a lithium button cell battery (CR2025). If the remote control does not
respond, replace the battery:
1. Turn the remote control over and press the tab to the right.
2. Slide out the battery tray.
3. Replace the battery with another of the same type, making sure that the positive side is facing upwards.
SAFETY FEATURES
- The appliance is equipped with a protection system that shuts down the appliance in the event of tipping
over.
- A thermal overload protector is built in to prevent overheating.
- When an overheating temperature is reached, the heater will automatically switch off. It can only resume
operation after restarting the appliance.
Reset :
- Unplug the heater and wait for the appliance to cool down.
- Then switch the appliance back on and use as normal.
NOTE: It is normal that when the heaters are turned on for the first time or when they are switched on after not
having been used for a long period of time the heaters may emit some odour and fumes. This will disappear
when the heater has been on for a short time.
10