Chacon ACCVPD-03 Mode D'emploi page 5

V. Function:
It supports electrical control or hand operation. It also can avoid someone to open the lock with other tools.
VI. Installation:
Use the self-contained screws to install lock body, cylinder and door holder into the door edge or door frame. The
distance between the lock body and lock holder should be around 5mm.
The loading spring is adjustable with the door's weight and door closer's power. If it makes noise when closing door,
please use spanner No°12 or pliers to twist/adjust hexagonal nut until the door open or close smoothly.
Use a 8~12V DC voltage and a power higher than 18W. Push or turn the button, lock could automatic unlock after
1 second.
VII. Caution:
Unlock continuous electrify time could not exceed 3 seconds.
For safety please use powdery lubricant for the cylinder, e.g. pencil powder.
I. Symbols
Don't throw batteries or out of order products with the household waste (garbage). The
dangerous substances that they are likely to include may harm health or the environment.
Make your retailer take back these products or use the selective collect of garbage
proposed by your city.
Direct current (DC)
EN – User manual
ACCVPD-03
Imported by Chacon S.A.
Avenue Mercator 2 • 1300 Wavre
Belgium