Cleaning And Maintenance - Bimar Goya SC41.EU Mode D'emploi

3. Flame Effect is operated by pressing light switch "
lighting when function is running. Flame light intensity is adjusted by turning the knob
(9); will be greater as the knob is rotated to the pos. maximum (clockwise).
4. To operate the fan only, press "
5. To operate the heater, press the switches (6) and (7) on the lens side. For get warm
air 900W press (6) switch, and for get hot air 1800W press both switches (6) and (7).
The thermostat knob (4) adjusts the room temperature will be greater the more the
knob is rotated toward the pos. maximum (clockwise).
6. To completely switch off the appliance, press all the switches on side opposed to
the lens, in pos.0, that it (lens) switch off when the function is de-activated. For switch
off the appliance, remove the plug from the socket.
This device has a device against overheating: If the temperature exceeds a certain
value, automatically stops the operation. Turn off appliance, remove the plug from
the wall outlet, make sure the air outlet grille and the heating element are free of dust,
lint, or whatever. Let the device cool (about 15 minutes). Insert the plug into the
outlet, turn on the switch, select the features you want, will not boot or in case of
doubt, consult a qualified professional.

CLEANING AND MAINTENANCE

Attention: before cleaning the fan heater, turn it off, remove the plug from the outlet and
wait for it to cool.
 Periodically check that the air-intake grill is not obstructed by fuzz or threads.
 Use a soft, slightly damp cloth to clean the body and glass; do not use metal scouring
pads or abrasive products.
 For long periods of inactivity, you must cover it and place it in a dry place; it is advisable
to put it in its original packaging to protect it from dust and humidity.
 A special tool is required to replace the lamp to flame effect type G9 (Max 40x2), lamp
holder AT834: contact an authorized service center, also for any repairs.
 If you decide not to use the fan heater, we recommend that you make it inoperative by
cutting the power cord (but first make sure you have removed the plug from the
electrical outlet), and make those parts harmless that are dangerous when played with
by children.
 Do not be covered under warranty all parts that may be defective for failure to follow the
installation instructions, or use, or maintenance, for damages caused by shipment. Also
included the replacement or repair of all parts subject to normal consumption (lamps),
and also the removable parts (glass), and accessories for construction (strains in resin).
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2011/65/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must
be taken to a special local authority differentiated waste collection centre or to a dealer
providing this service. Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain significant
savings in energy and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out wheeled dustbin.
" (8) on the lens side: lens is
". (5) switch on the lens side.
15/36