Publicité
UNGUSH
1.) Before starting, please read our assembling instructions careful1y and make yourself familiar with them.
2.) Follow our assembling instructions carefully.
3.) Compare the listed parts and fitting list to the contents of the cardboard.
4.) Prepare the necessary tools for assembling and make sure that the tools ore in proper condition. Bad tools lead
in some way to difficulties during the assembling.
5.) TCImake sure that the fumiture will not be damaged or grated during assembling, prepare on adequate area and
coyer the Hoor with the cardboards or another soft pad (Le. c10th or carpet).
6.) We recommend operating always with two or more people.
7.) Do not overwind screws. Check the screws from time to time and if necessary retight them.
8.) Keep the instruction and service sheets. Perhaps Vou will need them later on.
For wooden fumiture consisting of glass and steel or MDF and coated surface:
Wooden Furniture: Stains con be taken off with a soft, moistened c10th or by using a speciol polish (availoble in
supermarket and specialized stores). But do not forget to wipe the surface with a dry and soft c10th afterwards.
Steel furniture:
The metal has a varnished surface. The material could show little discreponcies in colour, c10uds or stains due to the
machine made production which should not be a reason for a complaint.
If some metal parts have been twisted out of shape during transport, Vou could carefully try to twist them into the
original position. Please do not overwind the screws and retight them From time to time.
MDF and coated surfaces:
MDF consists of wooden fibres (please read the a.m. instructions). Do not work on the coated surfaces with knives
or sharp objects, as this could cause damage the material.
Thot should not be a reason for comploints afterwords.
Due to machine made production, the MDF parts con have sharp edges. You could chamfer them with a fine
standard sand paper. Please do it carefully in order to make sure that vou will not remove too much of the material.
Carrying out the assembly is for adults only. Please, keep your children away during assembling. Children might
take srnall parts or fittings away or swallow them up. During assembling it could also happen that parts of your
furniture fall down on your children. Please, therefore, protect them and make sure that vou carry out the assembling
in their absence.
If your piece of furniture consists of glass, it should be handled carefully during assembling. Glass con break ct any
time and cause injuries. Therefore, vou should protect your eyes and hands by wearing special c10thing and safety
shoes, available in the supermarkets and specialized stores.
We are not liable for any material damage or injuries resulting From faulty assembling. We are also not liable for
any damage resultant From lack of maintenance during use. (i.e. retightening of screws, and etc .. .). We are not
liable br any damage caused by faulty use or use against its purpose.
We wish Vou a lot of joy and pleasure with your new piece of furniture.
Your Quality Assurance Team
Inter Link SAS
Important assembllng suggestions:
Maintenance advlce:
Warnlng:
/3-11
Publicité
