Sauder 101785 Instructions D'assemblage page 4

1
TWIST-LOCK
FASTENER (J)
Look for this icon. It means a video assembly tip is available at:
Repérer cette icône. Elle signifie qu'un conseil de montage vidéo est disponible à :
Busque este icono. Significa que un consejo práctico para ensamble de muebles, grabado en video, está disponible en:
www.sauder.com/services/tips
Read each step through completely before beginning the step. This box "-" is provided as a check- -off box. As you
complete each task, check it off.
- To begin assembly, push a SAUDER TWIST-LOCK
and LEFT END (B). Repeat this step for the BOTTOM (D) and SHELF (I).
NOTE: Be sure the TWIST-LOCK
Make sure the point is positioned as shown in the enlarged diagram. Do not tighten the
TWIST-LOCK
NOTE: If you need to remove a TWIST-LOCK
of the hole. Pull at the front and back edges, slowly working the FASTENER out of the hole.
101785
R
R FASTENERS are positioned as shown in the enlarged diagrams.
R
FASTENERS at this time.
www.sauder.com/services
Dowel end
LEFT
END (B)
RIGHT
END (A)
R FASTENER (J) into the large holes in the RIGHT END (A)
R FASTENER from a hole, pull the FASTENER back out
Make sure this point
is in this location.