4
model no. 009-1628-4 | contact us 1-888-670-6682
1
2
3
4
No. Description
1
Saddle
2
Shaft
3
Outer shaft
4
Base connecting bolt
SPECIFICATIONS
Capacity
Lift Range
2 tons (1814 kg)
10 1/4 – 15 1/4" (26 – 38.7 cm)
5
6
7
8
No. Description
5
Adjustment holes
6
Retaining pin
7
Metal cable
8
Base
Net Weight
9 lb 4 oz (4.2 kg)
SAFETY
Before using, read and understand all warnings and operating instructions.
•
Do not get under the vehicle to position or remove jack stands.
•
Secure parking brake and block unlifted tires.
•
Do not use stands to simultaneously support both ends or one side of a vehicle.
•
Always use stands in pairs on a hard, level surface.
•
Use as a matched pair to support one end of a vehicle only.
•
Do not overload the axle stands beyond the rated capacity.
•
Support the vehicle only at areas specified by the vehicle manufacturer.
•
Centre load on saddle prior to lifting.
•
Do not make any alterations to this product.
•
Never use any other additional saddles or supports or alter these stands in anyway.
•
Failure to heed these warnings may result in personal injury and/or property
damage.
•
Read, study, and understand all warnings and axle instructions prior to use.
•
Keep children away from working area.
•
Inspect before each use.
5