Daewoo L510B Guide De L'utilisateur page 9

OSD Functions
ICON CONTROL
LANGUAGE Select language for OSD (6 languages).
Adjust the width (horizontal size) of the
CLOCK
screen image.
Sharpen the focus by aligning the
illuminated pixels and adjust until the
screen image looks focused, crisp and
CLOCK FINE
sharp. Adjusting the
the
CLOCK
clear screen.
Adjust the horizontal & vertical picture
AUTO
TRACKING image quality and size.
Choose different preset color temperatures
or set your own customized color
COLOR TEMP
parameters.
R Adjust the red color.
RED CONTROL
GREEN
G
Adjust the green color.
CONTROL
BLUE
B Adjust the blue color.
CONTROL
Adjust the position of the display
H. CENTER &
horizontally (left or right) and vertically
V. CENTER
(up or down)
Adjust the display image quality (if the
SHARPNESS
screen proceed to scaling up).
Adjust the OSD position horizontally (left
OSD
OSD
or right) and vertically (up or down).
POSITION
English - 8
FUNCTION
after
CLOCK FINE
adjustment will produce a
.
ICON CONTROL
OSD
Adjust the display OSD Menu.
TIME OUT
Display horizontal & vertical frequency
STATUS
and polarity.
Reset the screen to the Factory Preset
RECALL
Display Settings.
Choose automatically the proper
AUTO
horizontal position and vertical position &
POSITION
size of the screen image.
Adjust the contrast of image, the
difference between light and dark areas on
CONTRAST
the screen.
Self Diagnosis
When the monitor doesn't display, if you press any key, Self
Diagnosis screen is displayed. Self Diagnosis function checks if
the status of the monitor is No Signal or Out of range.
No Signal screen is displayed when the
D-Sub signal connector is not connected
or the status of the monitor is on DPMS
mode.
Out of Range screen is displayed when
the applied frequency is under or over
normal range.
Normal range
(Non-interlaced mode only)
H : 30 - 62 KHz (1024 dot Max)
V : 50 - 85 Hz (768 dot Max)
English - 9
FUNCTION