Motorola WP300 Manuel D'utilisation page 8

MN007883A01-AA
Chapter 2: Getting Started
Chapter 2
Getting Started
Familiarize yourself with basic information on how to use your Remote Control Pod.
2.1
Charging the Pod
Procedure:
1 Turn off the Pod before charging
2 Connect the USB charging cable to the Pod to charge the Pod.
3 Plug the charging cable to USB power source.
Table 3: Charging Indicator
Power Indication
Rapid blinking red
Solid red
Blinking green
Solid green
2.1.1
Battery Indication
When your Pod is not charging, refer to the following table to understand the indication.
Table 4: Battery Indication
Power Indication
Off
Blinking Red
2.1.2
Status Indication
Refer to the following table to understand the audio and Bluetooth status indication.
Table 5: Audio and Bluetooth Status
Audio/Bluetooth Indication
Blinking in blue
Solid blue
Double blinking blue (Once)
Solid red
6
Description
Charging error
Charging
Almost fully charged
Battery is fully charged
Description
Battery is medium or high.
Battery level is low.
Description
Enter pairing
Disconnected
Connected
Mic muted