Charging Curve - Uniteck UNISAVE 5.12 S Mode D'emploi

CHARGING CURVE

BATTERY CHARGING STEPS
The charge maintenance is made in 2 steps : Boost and Floating.
Boost (I) :
Floating/ Charge
maintenance (U) :
Voltage thresholds
Boost
Floating
The load is at full power and UNISAVE uses 100% of the
energy provided by the solar panel, until the voltage reaches
the boost voltage. The battery is then charged to 90%
Battery charging is complete. The green "charge" light turns
green. UNISAVE continues to deliver a very low current to
compensate for the self-discharge of the battery, and finish
charging at 100%.
Gel / AGM / Liquid
14,2 V
13,8V
www.uniteck.fr
EN
Time
7