Ideal Security CR3 Guide Rapide

CR3 DEADBOLT INSTALLATION INSTRUCTIONS (SK703)
1. Fold template on fold line to 90
2. Install deadbolt 6" above the handle. Pencil mark this location. Check to make sure that inside
deadbolt does not interfere with prime door hardware. Close the storm door. Place side "B" of
template on the inside of the storm door and side "A" of fold line of template against wood jamb
or metal "Z" bar, whichever projects farther. Pencil mark the holes.
3. Make sure the template is straight as this affects the appearance and performance of the
keylock.
4. Use a centre punch and gently tap the three holes on the inside of the door only.
5. Using ONLY a 1/4" drill bit, drill 3 holes straight through the door. The centre hole may be
enlarged to a maximum of 5/16" to ensure that the spindle operates freely.
6. Remove the key. Place "Y" shaped end of spindle into lock cylinder in outside lock escutcheon.
Insert outside lock escutcheon into exterior holes. (Fig.1) Spindle must project ½" - ¾ "
7. If the hinges are on the left from the inside of the door looking out, mount the deadbolt with the
round end at the bottom. If the hinges are on the right, mount the deadbolt with the round portion
at the top.(fig.2A)
8. Place deadbolt in the locked position against inside frame of the door.
through round end of deadbolt and hold in place with a screw driver. Align outside lock
escutcheon with the screw and turn 2-3 times. Repeat for second screw. Do not overtighten
screws on the deadbolt as this will cause the spindle to bind and the deadbolt will not function.
9. Jamb may have to be notched to accept deadbolt. Attache deadbolt strike to jamb so that bolt
engages slot in strike.
Thank you for your purchase: If you are not satisfied with this product,
Please call us at 800-361-2236 (514-363-1030) before returning to store.
Perhaps we can resolve your difficulty and eliminate future customer
dissatisfaction.
E-mail: ideal@idealinc.com
o.
www.idealinc.com
(Fig.2) insert 1 screw
Drilling Template Drilling Template
A
Side
Fold line Fold line
B
Side
FOR OUTSWINGING DOORS ONLY FOR OUTSWINGING DOORS ONLY
RFQ703SK