Beper 70.404 Mode D'emploi page 8

USB essential Oil Diffuser Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
Product description: Fig.1
1. Mist outlet
2. Plastic cover
3. Ceramic cover
4. Water tank cover
5. Water tank
6. Base
7. ON / OFF button and steam regulation
8. Light button
9. USB cable socket
IMPORTANT NOTES BEFORE USING:
• Use the product only as described in this manual.
• The product must be placed on a flat and stable surface, taking care not to obstruct the ventilation fan placed
under the base of the product.
• Do not use detergents, solvents or aggressive agents to clean the product.
• Before using essential oils, carefully read the instructions for use on the bottle packaging.
• To fill the tank use only clean water at room temperature.
• Always unplug the power cord before doing any maintenance or cleaning the appliance.
• Do not immerse the product in water or other liquids and keep it away from showers, sink or similar places.
• At the end of use, always empty the tank to avoid the formation of mold and/or unpleasant odours.
• Do not move the product when the tank is full of water.
• Do not overfill the tank.
• Do not fill the tank while the product is connected to the power cord.
• Clean the tank regularly to prevent limescale.
• Before putting the essential oil in the tank, make sure that there is already water inside it. Do not put more than
10-12 drops of essential oil in order not to compromise the functioning of the product.
8