How To Operate - Nostalgia Electrics LPF210 Manuel D'instructions

• Secure the Splash Guards in place by inserting
them into the pegs on each Tier Bowl.
• There are seven total Extension Spouts. Two of the Extension Spouts
are spare parts in case any Extension Spouts are lost or damaged.
TOGGLE SWITCH
ON/OFF

HOW TO OPERATE

• Wipe out the Beverage Bowl with a damp, non-abrasive cloth and
dry. Wash Crown Topper, Splash Guard, Rods, Tier Bowls and
Extension Spouts in warm, soapy water, rinse then dry.
• After cleaning the unit, assemble the LIGHTED PARTY
FOUNTAIN Make sure the parts are fitted together tightly
and the fountain feels sturdy and is properly aligned.
• Find a stable surface near an electrical outlet. Unit must be level to operate
properly and to create the desired flowing effect. Make sure your cord is away
from any water source. If needed, it is acceptable to use an extension cord.
• Add beverage (LIGHTED PARTY FOUNTAIN holds 144 ounces of liquid) and
fill to the line on the inside of the Beverage Bowl. DO NOT fill above the line.
• Plug unit in and turn on by flipping the toggle switch on the Lighted Base.
• The liquid will begin to rise up the Rods, filter through the Tier
Bowls and trickle out of the Extension Spouts. At this time, adjust
the Tier Bowls and Extension Spouts to desired flow.
• Cups can be filled by holding them under the Extension
Spouts as the beverage trickles out.
6