GYS GYSFLASH 32.12 PL Manuel D'utilisation page 13

TROUBLESHOOTING, CAUSES, SOLUTIONS
Troubleshooting
1
Indicator flashes.
2
The indicator is on.
The indicator light remains on even
3
after pressing mode button
4
Indicator flashes.
5
Indicator stays on.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
GYSFLASH 32.12 PL
Causes
• Polarity reversal
• Battery voltage is too high
• Clamps in short-circuit
Failure during charging, battery not
recoverable
Thermal protection
.
Charger in sleep mode
Charging interrupted by pressing the
mode button
• Check that the clamps are correctly connected
• Verify that it is a 12 V battery.
Change the battery and press the mode button
to restart a charge
Ambient temperature is too high (>50°C), cool the
room and let the charger cool down.
Press mode button
charger to wake up from standby
Press the mode button
. load.
EN
Solutions
or connect a battery to the
again to restart the
13