Lenmar Undead Power BC6 Mode D'emploi page 3

HOW TO GO FROM DEAD TO UNDEAD
1
CHARGING THE MAVEN
Prior to initial use, follow the instructions
below to charge the MAVEN
completely.
Charge the Maven using the included
Micro USB cable. Plug the Micro USB
cable into the Micro USB port on the
bottom of the Maven. Plug the USB end
into your computer's USB port, a USB
wall adapter, a USB car adapter, or an
external battery pack.
When charging the Maven with the iPhone 6 installed, the
iPhone 6 battery will fully charge first and the Maven will
charge second.
LED INDICATOR: CHARGING STATUS
FLASHING
0%-25% 25%-50% 50%-75%
As the above percentages are reached, the
corresponding LED will go from FLASHING to SOLID.
2
INSTALLING YOUR IPHONE 6 INTO THE CASE
Before installing your iPhone 6 into the Maven make sure
screen protectors have been removed from the back side of
the iPhone 6.
All manuals and user guides at all-guides.com
75%-99% 99%-100%
USB