Safety Instructions - Electrolux AEG Perfect DB 50 Série Mode D'emploi

822 949 308 DB_5020_5040.book Seite 11 Mittwoch, 26. Oktober 2005 4:58 16
g Dear customer
Please read these operating instruc-
tions carefully. Above all please
observe the safety instructions on
the initial pages of these operating
instructions! Please keep these opera-
ting instructions for future reference.
Pass them on to any subsequent owner
of the appliance.
Features (Figure 1)
A Rating plate
B Stainless steel soleplate
C Steam exit holes
D Spray nozzle
E Filling aperture
F Steam selector
G Spray function button
H Jet button
J Power indicator
K Mains cord
L Heel with care information
M Cord storage
N Temperature selector
O Transparent water reservoir
P Measuring beaker
Temperature Selector (Figure 2)
a "Cold" setting
b Synthetics
c Silk/wool
d Cotton/linen
1

Safety Instructions

• The appliance may only be operated
using the voltage and current rating
indicated on the rating plate
(Figure 1/A).
• The appliance should only be plugged
into a socket installed according to
regulations.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge unless they have been given
initial supervision or instruction con-
cerning use of the appliance by a per-
son responsible for their safety.
• Caution! When in use, the soleplate
and cover of the steam iron reach high
operating temperatures!
• Do not leave the appliance alone when
switched on. Even when leaving the
room for a short period remove the
plug. Keep children away from the
appliance.
When steam ironing, steam is emitted
1
from the holes in the soleplate – risk
of burns!
• Always remove the mains plug before
cleaning the steam iron, filling with
water or emptying.
• The iron must not be left unattended
while it is connected to the supply
mains.
• Never immerse the steam iron in water!
• Always stand the steam iron on its
heel. When placing the iron on its
stand, ensure that the surface on
which the stand is placed is stable.
• The iron must be used and rested on a
stable surface.
• Do not twist or bend the mains cord or
wrap it round the steam iron while it is
still hot. Only store the appliance once
it is cool and after emptying any
remaining water.
• The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking.
g
11