ION Holiday Party Smart Guide D'utilisation Rapide page 7

Features
1. Remote Control Sensor: Aim the remote control here to
adjust the options.
2. Thumbscrew: Loosen and tighten this at the angle you want
the light to be projected.
Note: Attach the included Light Limiting Ring to reduce the
overall spread of the lights.
3. Stake: Place this into the ground to secure Holiday Party
Smart.
4. Flat Surface Stand: Attach this by unscrewing the
thumbscrew, remove the stake, and replace the stake with
the stand.
5. Dome: This projects the different colored lights.
6. Light Limiting Ring: Align the groove on the ring with the
sensor and snap in place using some force. This will limit the
overall coverage of the lights up to 30%, useful for preventing
light from spilling onto a neighbor's house.
7