Samsung 6 Serie Mode D'emploi page 9

7
Auto Tuning (2):
(Depending on the
country) Selecting a
search options
8
Clock: Setting the
Clock Mode
9
Setup Complete
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
You should do Setup (Menu → System) again at home although you did in shop.
If you forget the PIN code, press the remote control buttons in the following sequence in Standby
✎
mode, which resets the PIN to "0-0-0-0":
All manuals and user guides at all-guides.com
Select the channel source to memorise. When setting the aerial source to
Cable, a step appears allowing you to assign numerical values (channel
frequencies) to the channels. For more information, refer to Auto Tuning
(Channel Menu → Memorizing Channels) in the e-Manual.
When Air or Cable is selected first: After all Air or Cable channels
✎
are stored, the step for storing Satellite channels is displayed.
When Satellite is selected first: After all Satellite channels are
✎
stored, the step for storing Air or Cable channels is displayed.
Select Stop at any time to interrupt the memorization process.
✎
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
Select Close to finish.
The completed settings are displayed.
✎
→ 8 → 2 → 4 →
MUTE
English - 9
POWER (on).