Sauder 421957 Instructions De Montage page 5

Step 2
NOTE: Do not completely tighten the SCREWS in the
å
FRAMES. Start each SCREW a few turns in each FRAME
before completely tightening any of them.
Fasten the FRAMES (B and C) to the ENDS (A). Use
å
sixteen BLACK 1/2" MACHINE SCREWS (2) through the
tabs on the ENDS and into the holes in the FRAMES.
NOTE: Be sure the hole in the back edge of the TOP
å
FRAME (B) is facing down towards the fl oor.
B
The hole
must be here.
421957
C
C
A
www.sauder.com
BLACK 1/2" MACHINE SCREW
(16 used in this step)
A
C
2
Tab
Page 5