Sommaire des Matières pour Voxx Accessories 808 CANZ H2O SP445
- Page 1 WIRELESS SPEAKER Q U I C K S T A R T G U I D E Instructions en français ..xx Instrucciones en español ..xx...
- Page 2 Welcome to Canz H2O! The best little speaker to go anywhere: waterproof up to 3ft, and tested to withstand full submersion for up to 30 minutes! It even floats if it falls in the water! Of course, we don’t recommend leaving the Canz H2O in or under water for extended periods of time—but a little bit won’t do any harm! Just make sure the back flap covering the USB jack is sealed (see page xx).
- Page 3 Step 2: Charge the CANZ H2O Before you start using this speaker for the first time, it’s a good idea to charge it completely. To charge the speaker: Open the CHARGING DC IN flap on the back of the speaker. Plug the included USB cable into the jack behind this flap.
- Page 4 Step 3: Turn on Press and hold the Speaker front button on the front of the speaker. The power up tone sounds and the button starts blinking. After a few seconds, the speaker goes to Bluetooth pairing mode to set up with your smartphone.
- Page 5 Step 4: Pair + Connect Enable Bluetooth on your smartphone or other device. Make sure the button on the front of the speaker is blinking rapidly. (If it isn’t, give a short double-press on the button. The speaker gives an audio signal.) Choose CANZ H2O from the pairing options on your smartphone.
- Page 6 The speaker gives an audio signal when it’s finished pairing and connecting to your smartphone. The button turns solid blue. Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions. If you’ve previously paired your phone or other Bluetooth device with this speaker, the speaker will automatically attempt to reconnect to that device when...
- Page 7 Bluetooth Wireless Connection Tips • Make sure the Bluetooth capability of your device is turned on. • The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc.
- Page 8 Step 5: Play music Set your device’s volume for music to 75%. Note: This is to make sure the sound from the speaker isn’t too loud when you start streaming. Start playing music or other audio on your device. Within seconds, the speaker starts streaming the audio wirelessly via Bluetooth.
- Page 9 Tour of the speaker Front button turns the speaker on/off (press and hold) and puts the speaker into pairing mode (short press). It also shows the Bluetooth status of the speaker: • fast blinking blue while pairing or reconnecting • solid blue when paired •...
- Page 10 Charging indicator shows the charging status of the speaker: • solid red while charging • solid green when charged Turning the 808 Sounds On and Off (Silent Mode) The 808 CANZ H2O speaker provides status/alert sounds when you turn the speaker on and off, as well as when you’re pairing.
- Page 11 2. Keep these instructions. 1. Lire ces instructions. the apparatus. such marks by VOXX Accessories Corporation is under license. Other trademarks and trade names are those 9. Débrancher cet appareil pendant les orages 3. Heed all warnings. 2. Conserver ces instructions.
- Page 12 RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf. 1. Lea estas instrucciones. uso de dichas marcas por parte de VOXX Accessories Corporation se hace bajo licencia. Otras marcas comerciales y 9. Desenchufe este aparato en caso de tormentas o de 2.