Weston 01-0201 Mode D'emploi page 5

MIXER & WHISK ASSEMBLY
1. Attach the Removable Handle to the
Mixing Container. Align the bottom of the
Removable Handle with the "C" shaped
handle of the Mixing Container. Pull up and
over on the Removable Handle to snap the
Handle onto the Mixing Container (FIGURE
A). Test to make certain the Removable
Handle is snug into position on the Mixing
Container.
2. Mixer Attachment or the Whisk
Attachment From the underside of the
Mixing Lid, align the pegs of the Mixer
Attachment or the Whisk Attachment with
the slots in the Mixing Lid. The Attachment
should pop into place (FIGURE B).
3. Align the grooves in the Mixing Handle
with the splines on the Mixing Lid. Push the
Mixing Handle firmly down (FIGURE C).
4. Place the assembled Mixing Lid onto the
Mixing Canister.
5. The Whisker (FIGURE D) or the Mixer
(FIGURE D1) is now ready for use.
FIGURE D1
All manuals and user guides at all-guides.com
Mixing Container
Underside of
Mixing Lid
FIGURE D
Splines
Mixing Lid
FIGURE A
Removable
Handle
"C" handle
FIGURE B
Slots for Mixer
& Whisk
Attachments
Mixer
Attachments
Mixing Handle
FIGURE C
5