Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTION SHEET
PRODUCT: 64670 XTC 2 Bike Platform Rack - 2"
& 1-1/4" Receiver • Page 2 of 2
WARNING
Due to the increase in thinner/lighter "carbon frame bikes" this rack may be
inappropriate because the hook clamps the frame. Please check with your bike
manufacturer for specific details. We developed the Semi 2.0 and Semi 4.0 for
these types of Carbon frame bikes. They feature ZERO frame contact. The hook
arm grabs the wheels and not the frame.
IMPORTANT NOTES:
•
T his bicycle rack has been designed to carry 1 or 2 bikes.
•
T his rack is designed for typical use and applications (on paved or smooth gravel roads).
Do no use this rack on a vehicle that will be driven on rough roads or where the rack
(and bikes) will be subject to significant or constant jarring and/or shock, or any vehicle
with very stiff springs that will transfer the load shock directly to the rack and bikes.
•
P roper fitting and installation of this carrier to your specific vehicle is critical, and is not
the manufacturer's responsibility.
•
I mproper use of this product may result in damage to your rack, your vehicle, your
bicycles, or even other vehicles driving behind you (as a result of colliding with or trying
to avoid fallen bicycles and/or the rack.
•
T he purchaser should be aware that the load created by a rack and bicycles can exceed
the maximum rating on the hitch or bumper.
•
S wagman Racks are powder coated to help prevent rust. When leaving them outside for
extended periods of time the finish will lose its luster. It is recommended that when not
in use it is stored indoors.
•
T ake care to add padding on any area of the bikes that touches another bike or any part
of the vehicle. Damage can and will happen (to your bikes and/or to the vehicle) if care
is not taken during the loading and transporting of your bikes, and padding used where
necessary.
•
B ike tires, ratchet hooks and accessories should be kept at least 6" away from the
exhaust pipes of the vehicle. The high temperature exhaust exiting from the exhaust
pipes is hot enough to melt or damage items.
•
B ikes fitted with large accessories (such as a child carrying seat) will greatly increase the
wind resistance and therefore the pressure on the rack and all vehicle mounting
points. Reducing vehicle speed will reduce the chance of any problems occurring
because of this situation.
•
A fter reading this manual, should you have any additional questions regarding
the compatibility, fitting, and/or use of this rack, please call your nearest Swagman
authorized retail dealer or Swagman Customer Service.
Mounting the bike rack on a Trailer or 5th Wheel:
1. P urchaser is advised that the load created by rack and bicycles may exceed the strength
of the trailer or fifth wheel bumper, mounting location or the bike rack.
2. The rack is not covered under warranty if mounted on the back of a trailer or fifth wheel.
ATTN: STATE OF CALIFORNIA CONSUMERS
WARNING: Cancer and Reproductive Harm • www.P65Warnings.ca.gov
300 - 1880 Government St. • Penticton, B.C. Canada V2A 7J1 • Phone (250) 490-8883 • Fax (250) 490-8885 • www.swagman.net
set screws
Universal Foot
1/2" Threaded Pin
Lowest point of frame
REV 23/10/20
3
4
5
6
Publicité
