Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS
LOCATION OF PARTS AND CONTROLS
1.
Power Button (Hold ON / Press OFF)
2.
Timer Button
3.
Lid
4.
60-Minute LED Indicator
5.
45-Minute Timer LED Indicator
USING THE TOWEL WARMER
The Towel Warmer will warm two bath towels measuring approximately 40" x 70". For best results, use 100%
cotton or cotton blend towels.
1.
Place the Towel Warmer on a dry, level, hard surface.
2.
Insert the power cord into an electrical outlet.
3.
Place your dry towel(s) inside. Replace the lid.
4.
Press and hold the POWER BUTTON until the TIMER LED INDICATOR turns on. The TIMER LED INDICATOR
turns blue, indicating the Towel Warmer is preheating (default timer setting is 15 minutes).
5.
When the Tower Warmer has reached the optimal heating temperature, the TIMER LED INDICATOR turns
red. The Towel Warmer will continue to maintain the optimal heating temperature for the remainder of
the timer setting (timer starts to countdown when TIMER LED INDICATOR turns red).
6.
To ensure the towel is fully heated, you may want to leave the towel in the Towel Warmer for a few
minutes after the TIMER turns off.
7.
The Towel Warmer will automatically turn off after the selected timer setting has expired. Press the
POWER BUTTON to turn the Towel Warmer off if you would like to power off the unit sooner.
SELECTING THE TIMER
1.
When the Towel Warmer is powered on, press the TIMER BUTTON to automatically default to 15 minutes.
2.
Press the TIMER BUTTON again to select the 30-minute timer.
LUXURY TOWEL WARMER
Model Number: TWB01/TWB2C
Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USE
All of the safety and operating instructions should be read,
adhered to and followed before the unit is operated.
ZADRO®
7
6
5
4
8
2
1
9
6.
30-Minute Timer LED Indicator
7.
15-Minute Timer LED Indicator
8.
Hot Surface Caution LED Indicator
9.
Cord Wrap
3
Publicité
Table des Matières
