Maintenance / Cleaning; Mounting Diagram - GE Current Evolve LED Area Light Guide D'installation

5

MAINTENANCE / CLEANING

Risk of electric shock. Make certain power is off before
attempting any maintenance.
• To maintain high efficiency of the lens, occasiona
cleaning of the outer lens surface may be needed,
with frequency dependent on local conditions.
• Use a mild soap or detergent, which is essentially
neutral pH (pH approximately 6 to 8), nonabrasive,
and which contains no chlorinated or aromatic
hydrocarbons.

MOUNTING DIAGRAM

(Drill Template to scale)
1.3 in.
(33 mm)
2.9 in.
(74 mm)
WARNING
• Wash thoroughly, using a soft cloth.
• Rinse with clean, cold water and wipe dry.
6
STORAGE
• Until installation, all units should be placed in a
covered dry storage area. The storage area should
not exceed -40°C (-40°F) to 50°C (122°F).
- This can be preferably in a roofed area or with a
tarp that is secured in such a way to keep water
off of the corrugated boxes (cardboard boxes).
4.4 in. (112 mm)
3.5 in. (89 mm)
Octagonal
J-box
4 in. (102 mm)
Octagonal
J-box